Hardware & Credentials

CICP2100

    The Continental CICP2100 uniVerseTM Single Door Controller provides support for two (2) readers on one door, using power over ethernet (POE).

    Used in a CA3000 or CA4K access control software environment , the tamper-supervised CICP2100 Power Over Ethernet Controller, supports two readers and/or one low current strike via POE, ts in any standard double gang electrical box, and can be used networked with, or in place of more traditional expandable Accelaterm or Supertwo Controllers and/or Networx Wireless Access Control Locks. Includes metal faceplate cover with LED indicator status window and connection-diagramed secure self-sleeve. (Double Gang box, not supplied).

  • POE Panel Supports 2 Readers for 1 Door
  • Supports 2 Wiegand Readers or one Wiegand and one RS-485 (2-wire) reader
  • Superfast ARM Processor
  • Supports 200K cards
  • 4MB on-board memory
  • 1000 Standard transaction buffer, Expandable to 10,000
  • 256 Time schedules; 30,000 Access groups; 5x100 Holidays
  • 2 Form C Relay outputs, door and auxiliary (MOV-protected)
  • Reader & Accessory Power- 320ma @5VDC & 700ma @12VDC
  • POE Onboard Ethernet
  • High speed 921.6 KBPS baud communication support
  • Supports RS-485 Repeat Communications (4-wire)
  • 4 Supervised inputs
  • Supervised Tamper
  • Unsurpassed FIPS/CAC/TWIC performance

Download Spec Sheet PDF

New! Accelaterm CICP2800 Super-Speed

  • 16-Door Access Controller
  • Featuring:
  • 8 to 16 reader panel, minimum 40,000 card capacity, 100,000 - 200,000 typical, expandable to Million+
  • 10-Times Faster! Under 5-Minutes for full downloads (firmware & data). Onboard direct-connect LAN adapter for speeds over 921Kbps
  • Superfast 54MHz 32-bit processor
  • 4MB on-board memory, expandable to 20MB
  • 24 Supervised inputs; expandable to 72
  • 17 Form C-rated relay outputs, expandable to 65
  • 1000 Transaction buffer, expandable to 50,000(software dependent).
  • 256 Time Schedules; 30,000 Access groups; 5x100 Holidays
  • Unsurpassed FIPS/CAC/TWIC performance
  • Retrofit-Ready -Simultaneous multi-reader/ID credential support
  • Super-capacity power supply for max. standby & reader power, included
  • Virtually Environment- & Power Outage-Proof – Full onboard multi- stage lightning protection and fully distributed processing to internal memory (works as standalone system if server is down).
  • Lowest acquisition & maintenance costs – 3-year warranty

Use with new CA3000 v2.11 Software!

Download Spec Sheet PDF

Napco security technologies

Single Door Controller/Lock

  • Up to 5000 badges
  • 1-2 Wiegand output devices (readers and or keypads) controlling one door
  • Downloadable Firmware loaded to Flash memory
  • 99 Time Schedules
  • 99 Access Groups
  • 5 sets of 30 Holidays
  • Supports up to 63 Networx Panels per Gateway
  • Inputs for door position contact to indicate the status of the door
  • Inputs for a remote release button or sensor
  • Proximity Card Formats Supported: Most formats supported
  • Onboard bi-directional Networx radio
  • Operating Temperature: 14-120°F (–10-49°C)
  • Input Power: 16.5VAC via Class 2 Plug-In 50VA- Transformer (supplied model TRF-14)
  • Maximum Lock Power Output Current: 1.5A @12VDC
  • Primary and Secondary Relays: SPDT Form C, N/O, N/C 8A @ 30VAC or VDC
  • Supplied Backup Battery: Sealed Lead Acid 4AH
  • Battery Backup Time: Approximately 2 hours at full load
  • Housing Dimensions (H x W x D): 10.5 x 8.5 x 3 in. (26.6 x 21.6 x 7.6 cm)

Download Spec Sheet PDF

Napco security technologies

Continental Controllers

Continental's Turbo Superterm and SuperTwo control panels are expandable, intelligent and capable of supporting all access control functions. These distributed processor-based panels will operate as standalone units if server-communications are interrupted. Panels are programmed with CardAccess software, a Windows based access control and security management solution. Legacy panels are field expandable, allowing for longer life and for adding features and enhancements. Continental's controllers feature extensive multi-stage lightning/transient protection on-board for maximum reliability even in harsh environments. Our Continental panels accept industry standard Wiegand output devices and supports virtually all card/reader technologies. Proximity, Biometric, Magnetic Stripe, Barcode, Wiegand, Barium Ferrite, Keypad and Smart Readers are easily connected and controlled.

SuperTwo

  • 2 doors
  • Supports 20,000 – 125,000 cards
  • 5 to 48 outputs; 8 to 48 inputs
  • High speed communications
  • Optional Onboard Network Adapter

Click Here for Super Two

Napco security technologies

Super Two I/O Expander

  • Up to 3 additional Super Two I/O Expansion Boards are housed in matching enclosure
  • Each Super Two Expansion board supports up to 16 inputs and 16 relays, for a system max. of 48 inputs & 48 outputs

Click Here for I/O Expander

Napco security technologies

Turbo Superterm 8

  • 8 doors
  • Supports 20,000 – 210,000 cards
  • 17 to 65 outputs; 24 to 72 inputs
  • High speed communication & transaction performance
  • 4-door Turbo Superterm 4 also available

Click Here for Turbo Superterm

Napco security technologies

Legacy Panels

Smarterm
  • 4 doors
  • 2,400 to 130,000 cards
Miniterm
  • 2 door
  • 3200 cards
Microterm
  • 1 door
  • 1,100 cards

Click Here for Legacy Panels

Continental Controller Comparison Matrix

AL-IME2-EXP: Expander Module

AL-IM2-80211: Gateway

AL-IME2-PIE: Plug-In Expander Module

Trilogy Networx

CA4K Rebate

333 Bayview Avenue, Amityville, NY 11701 • (631) 842-9400
Fax: (631) 789-9292  email: salesinfo@napcosecurity.com
Copyright 2017, Napco Security Technologies, Inc. All rights reserved